Adhesive for carpet Tarkett TKF320 10kg

Tarkett TKF320 is a special adhesive material for fixing loose-laid textile tiles (SL) to various substrates, as well as loose-laid LVT. Suitable for all floor substrates that allow installation. Allows tiles to be lifted at any time, e.g. from a raised floor.

APPLICATION
Apply TKF 320 evenly onto the substrate with a small foam roller and leave it to dry until it forms a clear layer.
Drying time on absorbent substrates is 15 to 30 minutes.
On non-absorbent substrates, allow a longer drying time until the layer is completely dry.
Install the flooring and roll it over the entire surface (using a 50kg roller).
Once the flooring is installed, you can walk on it.
Be careful when applying the adhesive; avoid applying it over the joints of the raised floor, to prevent the raised floor panels from sticking together.

UNDERFLOOR HEATING
Suitable for use with underfloor heating.
See the operating instructions and the additional guidelines issued by the Zentralverband des deutschen Baugewerbes. Underfloor heating systems must comply with existing building regulations. Drying times must be observed in all situations. Switch off the heating 48 hours before starting work. The heating should be brought up to operating temperature gradually, in stages, within 48 hours after the flooring has been installed. Do not use while the underfloor heating is switched on.