Aqua shield /Refresher – cleaning agent Haro №412428 for osnovno cleaning and osvezhavane of parquet and laminate 1 l.

Aqua shield /Refresher Haro – a product for deep cleaning and refreshing parquet and laminate flooring

Applying aqua shield creates a new protective layer that revives the surface's appearance and adds new shine.

- Refreshes floor surfaces long-lastingly

- Increases durability

- Protects against moisture penetrating from above

The floor must be thoroughly cleaned (dust-free) before applying Clean & Green aqua shield. Shake the floor care product well before use. Then pour it undiluted into a bucket. Then apply the clean and green aqua shield with a flat, damp mop, spreading the cleaning agent over the floor in even, overlapping lines. Always apply along the length of the boards. Wait about 2 hours before subjecting the floor to traffic and load.

Do not eat, drink or smoke while using it.

Keep away from draughts while applying.

Afterwards, make sure there is full ventilation for drying.

In case of contact with eyes or skin, rinse immediately with plenty of water.

Do not allow the product to enter waterways, drains/sewers or soil.

Clean the working materials with water and soap immediately after use.

HARO Aqua shield /Refresher

For refreshing hard parquet floors – lacquered, oiled, vinyl flooring, laminate

Applying HARO refresher provides extra protection - it refreshes the appearance of the surface and increases the level of shine.

Application: Start with a basic cleaning of the floor (dust-free). For adhesive-related cleaning, we recommend HARO intensive cleaner. Shake HARO refresher well before use and pour it undiluted into a suitable bucket/container. Then apply HARO refresher evenly over the floor in a dense layer, using a flat, damp mop, in overlapping straight lines. Always apply in the direction of the boards. Wait about 2 hours before subjecting the floor to traffic and load.

Optimal conditions for use: Room temperature should be between 18 and 22°C, and relative humidity between 45 and 65%.

Coverage: Approximately 30 ml/m², depending on the absorbency of the floor surface. Clean working materials with water immediately after use.

Composition (according to the detergent regulation): Synthetic dispersions containing no metal salts, polyethylene waxes, water-soluble solvents. EUH208 - contains benzisothiazolinone, methylisothiazolinone and methylchloroisothiazolinone. May cause an allergic reaction. Emergency number: +49 8031 700-9166

Shelf life: 3 years

pH value: approximately 8.0

Giscode: GE10

Warning: Keep out of reach of children! Do not eat, drink or smoke during use. Ensure good ventilation during application and drying. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not allow the product to enter water supply systems, sewers or soil. Recycle only completely empty packaging. Dispose of liquid product residues at a collection point. Not suitable for spraying. Use a P2 dust filter when sanding. To reduce slipperiness of the floor, we recommend cleaning the floor regularly with a HARO cleaning product (depending on floor type: parquet cleaner, design floor cleaner, DISANO cleaner, or laminate floor cleaner). Use open containers quickly. Close containers immediately after use.

Protect from freezing.